How to choose waterproof tact switch
The waterproof tact switch is a switch that can be soaked in water or in the rain and is not easy to fail. The general waterproof switch is IP67. That is, it can completely protect the dust in the sky, and at the same time, it can be in the water at about 1M, at room temperature, and it will not be damaged for about 30 minutes.
The waterproof tact switch has a long service life, heat resistance, high temperature current impact resistance. It can be used in a very humid and cold environment, which solves the need for power engineering in a humid and cold environment and prevents safety risks due to environmental reasons.
Waterproof tact switches also often exist in family life, usually in relatively damp and cold places such as kitchens and bathrooms. Many waterproof tact switches can be operated with wet hands.
The key classification of waterproof tact switch: waterproof patch tact switch, waterproof software tact switch, waterproof function key tact switch, waterproof plastic film tact switch.
So what kind of problems do you need to pay attention to when choosing a waterproof tact switch and installing a waterproof tact switch?
The first of all, the main function of waterproof light touch switch is waterproof, so when purchasing a waterproof switch, you must pay attention to the waterproof characteristics of the switch. Generally, waterproof switches produced and processed by reliable manufacturers have corresponding performance indicators. It may be necessary to avoid buying products from small processing factories. The quality is not guaranteed, which is very prone to safety risks.
Then there is the overall product quality of the switch. Generally, the switch needs to be used for a long time. If it doesn't take a long time to destroy it, it will be very troublesome. In order to avoid such troubles, the quality is very important. For example, the position of the switch installation, the working voltage, in fact, no matter how tight the waterproof switch is, it does not mean that the switch is completely sealed, and the entry of corrosive gas or ingredients should be avoided.
Leave a comment