30A 12V Prewired Toggle Switch Kit - ON/OFF Plate and Cap

What's in the Box

1 x Prewired metal toggle switch

1 x Black ON/OFF mounting plate

1 x Protective toggle cap and pictured sealing pieces

4 x Mounting screws

Product Features

Positive ON/OFF Control - The latching SPST toggle remains in its selected ON or OFF position. The marked faceplate makes the switch state legible on a vehicle, boat, or equipment panel.

Prewired Lead Pair - Two 14 AWG leads are attached to the switch body. The approximately 20 cm / 7.8 in leads remove one small terminal-preparation step at the rear of a panel.

Sealed Toggle Details - A red ring is visible around the metal toggle neck and the switch body has sealed-looking lead exits. The separate black cap can cover the lever when the installation calls for another barrier against incidental spray.

Complete Mounting Face - The black ON/OFF plate has four corner screw holes and a central switch opening. The included screws let the visible control be installed as a tidy panel assembly rather than a bare toggle through an unlabeled hole.

Defined Electrical Ratings - The switch lists 30A at 12V DC as well as two AC ratings. The values give buyers an initial screening point for a load, provided circuit protection and installation conditions are checked.

Technical Specifications