- Shipping & Returns
About this item
【Terminal】- Positive and negative 6 studs marine bus bar, this part have 2 type studs size for choose, 6 x M6 (1/4”) terminal studs or 6 x M8 (5/16”) design, it's stainless steel material.
【Rating】- This 12v battery distribution block can handle voltage @ Max 300V AC, 48V DC, and continous amperage @ Max 130A AC, 150A DC.
【Round Corner Base】 - This battery distribution block is unique round corner base design, which makes the battery distribution block unique and special, looks more extraordinary compared with other busbars.
【More Open Area Design Cover】 - The cover of this insulated busbar will allow 180° wire lug installation and can meet variety kinds of installat methods of end terminals.
【Application】 - This marine 12V bus bar uses copper plates and stainless steel terminals as conductors, which enables the distribution block to work in extreme environment, suitable for automotive, car, RVs, trucks, marine, boat,solar energy, etc.
1 x Red Positive Bus Bar
1 x Black Ground Bus Bar
4 x Mounting Screws
Specifications for this item
|Connection Type||Red for Positive
Black for Negative
|Terminal Studs||6 x M6 (1/4”) or 6 x M8 (5/16")|
|Max Voltage||300V AC, 48V DC|
|Max Continuous Amperage||130A AC, 150A DC|
|Terminals Material||Stainless Steel|
|Cover Material||Clear Polycarbonate|
|Overall Dimension For M6 Type||150mm x 28mm x 31.5mm (LxWxH)|
|Overall Dimension For M8 Type||150mm x 28mm x 35mm (LxWxH)|
We will use Economy International express service operated by China Postal Express. And it’s for light-weight products that less than 2kg with delivery in 10-25 days.
You can choose this way, and normally we will use FEDEX or DHL. the shipping Rate is depend on the total weight of products, and delivery date will be 3-7 days.
Refund arrival time: 1-2 working days
Refund path: return to the original path
Refund contact information: firstname.lastname@example.org
High quality and exactly what I needed.
Sturdy brackets with mounting screws included. Nice plastic cover for each. Worked perfectly for the simple wiring project in my van
I used the negative to gather all of the grounds on my camper to allow a single point connection to a Smart Shunt to monitor the battery bank. With the 150 Amp capacity, it will be more than enough capability even for my 2000-Watt inverter.
Most other terminal blocks like this are only rated at 100-Amps (1200 watts in 12-volt DC) and are not sufficient for the intended use in most cases. However, each use case is different!